How To Install A Raid Card

A P P E N D I X B

Configure RAID Controller in the BIOS Setup Utility

The Lord's day-supplied hard disk drives for the Sun Fire X2270 are shipped without a RAID configuration. If a RAID configuration is required, you will demand to configure the RAID Controller in the BIOS Setup utility prior to commencement your Windows Server operating system (OS) installation.

After completing the RAID Controller configuration in the BIOS Setup utility, and depending on the operating system and method that yous are using to install the Os, continue with the installation procedure that is advisable for your Bone:

• Windows Server 2003: Prepare RAID Drivers for Delivery
• Windows Server 2008: Install Windows Server 2008 Using Local or Remote Media or Install Windows Server 2008 Using PXE Network

Configure RAID Controller in BIOS

i. Reboot the server and press F2 when the Sun Logo appears.

The BIOS Setup utility dialog appears.

2. In the BIOS Setup utility dialog, select Avant-garde --> IDE Configuration.

The IDE Configuration menu appears.

iii. In the IDE Configuration menu, select Configure SATA Every bit, then printing Enter.

A carte du jour appears listing the SATA options: IDE, RAID, and AHCI. AHCI is set by default.

4. In the SATA Options menu, select RAID, and so printing Enter.

5. Press F10 to salvage your changes, exit the BIOS utility, and reboot the server.

half-dozen. While the server is rebooting, printing <Ctrl-I> to admission the RAID configuration.

The Intel Matrix Storage Manager option ROM dialog appears.

7. In the main bill of fare of the Intel Matrix Storage Manager option ROM dialog, select (one) Create RAID Volume, so press Enter.

The Create RAID Volume menu appears.

8. In the Create RAID Volume menu, do the following:

a. Provide a name for the RAID volume and press Enter, or printing Enter to accept the default proper noun.

b. Select either RAID 1 (Mirror) or RAID 0 (Stripe) every bit the RAID level, then press Enter.

Utilize the up and down arrow keys to scroll through the available RAID level values.

c. Specify the volume capacity and press Enter, or printing Enter to have the default volume chapters.

d. Select Create Volume, then press Enter.

A warning message appears stating that all data could be lost. Are you certain y'all want to create this book? Y or N.

e. In the warning bulletin press Y to confirm the book cosmos.

The new RAID volume is created. Information describing the RAID volume appears (for example, the RAID ID, Volume Name, Level, Status).

9. Select EXIT and press Enter to exit the Intel Matrix Storage Manager utility.

A confirmation message appears confirming that you want to get out the Intel Matrix Storage Manager utility.

10. In the confirmation bulletin, press Y to ostend the get out.

Copyright © 2009 Dominicus Microsystems, Inc. All rights reserved.

Source: https://docs.oracle.com/cd/E19432-01/820-7143-11/bios_RAID.html

Posted by: patewitilly.blogspot.com

Share this post